Troubleshooting the MerCruiser Warm Stop Condition So we are now to the point of either sorting out minor issues or dealing with a larger one. Up to this point, there have been a few challenges. The latest is the MerCruiser Warm Stop Condition. We changed the oil and oil filter after we ran into the issue last week. I’ve replaced the oil pressure switch and sender. The SmartCraft Four in…
Testing for MerCruiser Water Ingestion So up to this point, we have rebuilt the top end in my 2007 Sea Ray 210 select. Additionally, we were not able to definitely identify where all the water in the engine came from. I suspect a myriad of issues like wrong or used head gaskets, used head bolts, and improper head bolt installation. In addition, we found a bad exhaust flapper and the…
As of Wednesday, April 28th we got her started. So on Saturday, May 1st, I decided to start tidying up the electrical by wire tying things in place. I also want to remove the alligator clip that is being used as a ground. This is where things take a turn for the worse. Additionally, this is where hindsight is twenty-twenty. So I find a nice place for the ground on…
So up to this point we have disassembled and reassembled the top end of this MerCruiser 5.7 MPI engine. We were trying to determine the cause of gallons of water in the oil of the motor. Additionally, we unable to concretely determine the source of the water ingestion. I much suspect it was a combination of multiple issues from not using the correct head gasket, not using the proper sealant…